Sea gull lighting 16004-15 Instrukcja Użytkowania i Eksploatacji Pobierz pdf

16004-15

1. Model CD-52, manufactured by Ja Yang (E106510)

16004-15

Top view of switch housing plate.

Disconnect Molex Connectors in switch housing

plate by pushing down on tab and pulling the

two (molex connectors) apart.

CAUTION: To reduce the risk of electric shock,

install only in Fan

CAUTION : FOR CONTROL OF SHADE POLE, PERMANENT SPLIT

CAPACITOR, OR UNIVERSAL MOTORS ONLY.

Connect the molex from the receiver to the

molex in the switch housing plate b

y aligning

and sliding together. Note: For longer distance

operation, coil receiver antenna around the

natural wire (white wire).

Align gap in receiv

er with the screw between

speed switch and reverse switch and slide

receiver (Dip switch facing housing plate) into

switch housing plate. R

eceiv

er should fit direct

ly into area in the switch housing plate. Note:

If installing light kit, use the blue and white

wire from the receiver.

Set dip switches on the R

emote T

ansmitter and

Remote Receiver to the same settings. This

must be done so the units will communcate

properly. If you have other fans you can set to

control from one tr

ansmitter b

y setting both

receivers the same as the transmitter. If you

e more than one fan with remote. You can

set the dip switches to different positiosns to

have seperate control.

Remote Transmitter Dip swtiches

Remote Receiver Dip switches

2. Model 9701, manufactured by Furn Fan (E141261)

3. Model AC-552, manufactured by Air Cool (E75795)

Caution: T

urn off power at fuse box to avoid

possible electrical shock.

INSTRUCTIONS FOR YOUR NEW

REMOTE FAN CONTROL SYSTEM

1 2 3

16004-15 1
/ GP 23A all 12V 2

Podsumowanie treści

Strona 1 - 16004-15

16004-151. Model CD-52, manufactured by Ja Yang (E106510)16004-15Top view of switch housing plate. 2Disconnect Molex Connectors in switch housing

Strona 2 - / GP 23A all 12V

16004-15The wall control transmits the command signals via radio waves to the receiverinstalled in the fan’s hanging bracket or on the fan. The receiv

Strona 3

16004-15Remote Control Transmitter Features:FAN SPEED Depress “l dot” for low speed, “2 dots” for medium or “3 dots” forhigh. To turn fan off press sq

Komentarze do niniejszej Instrukcji

Brak uwag

Sea gull lighting 16004-15 Instrukcja Użytkowania i Eksploatacji

Przeglądaj online lub pobierz Instrukcja Użytkowania i Eksploatacji dla Wentylatory domowe Sea gull lighting 16004-15. Sea Gull Lighting 16004-15 Use and Care Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Wentylatory domowe Sea gull lighting 16004-15